Requirement!
STRAKON 2026+ (64 Bit) must be installed!
Download and Installation
- Click the STRAKON2026+Patch2_Revision3.exe (20.08.2026) file and the Save command.
- Select the directory in which you want to save the file.
- Click Close.
- Click on the saved file STRAKON2026+Patch2_Revision3.exe and follow the installation instructions.
- Start STRAKON (the user data is now automatically installed).
- After the installation the version STRAKON premium 2026+ .2.3 (64 Bit) is available in About STRAKON (menu ?)
If your reported hotline request is one of the items listed in the patch edit, please check that it is being processed after the patch has been installed.
STRAKON 2026+
Revised Themes for Patch 2
General
Settings- Import DXF /DWG: The program crash after turning on the "Use WCS at segment origin" check box and the close of the setting with OK has been fixed.
2D Design / Edit / Accessories / Unitization
Dimensions- If the unit of measure is "mm", rounding to cm is now done correctly.
- Double wall: The report for the billing list will work again.
- The cause of the unhandled exception when clicking the "Place" button has been fixed.
Reinforcement
Displays of 3D/Cube Reinforcement- Modifies were made when calculating the position for the end point of the label lines of mat bending molds.
3D Modelling / Cube
General- Modifies were made in the display of the check boxes of project levels when switching plans in the drawing model.
- The program crash when clicking on "Configure submodels" has been fixed.
- Copy project model: The reinforcement label and dimensions contained in the Cube view are retained in the copied project.
- Polygons can be create again in all directions.
- Replacing stairs of a staircase in the model using "Insert > Flex-Part" no longer affects the location of the stairs within the staircase.
General
- During extrusion (directed extrusion with constant cross-section, F4), the contained reinforcement now remains bound.
- Typical bending shapes of stairs are now saved correctly and remain in the stair.
Rebar
Cube View (Project Model)
- In merged object regions, such as corners or T-joints, the alignment of the U shape is preserved as the laying section is defined.
- If the "Other reinforcement" function is selected, you can now specify negative start and end distances for routing.
Object - Dimension
- If the dimension is placed between the first and second dimension points, the orientation of the dimension is now preserved.
- With the selected Cube Dim Color Scheme, unbound dimensions are now displayed in red. The dimensions in the selected shades of brown remain unchanged.
- The pen weight of Text 1 is now assigned for the description text of a dimension.
- The second dimension text again contains the correct height information for the wall openings.
Object - Reinforcement label
- A rebar bending shape without a laying can be labeled again as a bending shape for the reinforcement label.
- You can now label area moves of rebar that are only partially visible.
3D Views
Refresh- When updating the drawing Cube views from projects < 2026+, the alignment of the texts is now preserved.
Flex-Parts / 3D Embedded Parts
Flex-Parts- Sample data: An incorrect formula no longer blocks the evaluation of subsequent rows.
Semi Precast Parts
Slab- Profile mounting parts in the solid slab are now delivered with the correct Z-height.
- Lattice girders are now correctly cut by mirrored 3D embedded parts.
- Enclosures made of rebar or meshes are now also possible on round ceiling edges.
- The iso links are now transferred correctly to the individual sheets.
- Reinforcement that is in two different elements is no longer dispensed. Instead, a corresponding message is displayed.
Output / Import/Export / Interfaces
IFC- Export: A customer-specific embedded part can be imported back into Gesys from IFC.
- The PTS log is only generated if the corresponding check box is selected. If the check box is cleared and the credentials are not filled in, no error message will be displayed.
Revised Themes for Patch 1
General
File
Open drawings
- The message "Fonts used in the drawing are not available in STRAKON" is no longer displayed for formatted texts.
- When the drawing is opened, 2D texts without reference point are automatically corrected, i.e. a modify of symbols can be carried out again without errors.
- The default sub-directories of a project are created correctly when a new project is create for cloud synchronization.
- Fixed a program crash when opening project model shop drawings caused by custom Flex-Parts
2D Design / Edit / Accessories
3D Embedded Parts / Embedded Parts- The quantity of list label characters in the individual embedded parts schedule has been increased to 256.
Reinforcement
Rebar- The max. leg length on the bar representation with a "CV laying > Area - Bent", which consists of only 3 rings, is again correct.
- Refreshing 3D views will no longer move bar representations of bent items.
- Modifies were made in the positioning of the Cube meshes and in the display of their measurements in the 3D view.
- Modifies have been made in the display and labeling of Cube meshes in sections without depth.
- Further various modifies were made with regard to the reinforcement labeling of rebar and meshes in the filed Cube and 3D views.
- The marking line of bar routing (entered via quantity and distance) is no longer shortened or shifted when the quantity of the laying is increased in the Cube.
- The weight specified in the special mesh rebar total schedule now matches the weight specified in the formula calculator module.
3D Modelling / Cube
General- Project model: The display of the selected submodels in the window as well as in the configuration of the submodels is now synchronized.
- Coordinate systems for project model shop drawings can be both re-created and reset.
- Schöck Isolink: Embedded the latest compute core from the manufacturer
- Shop drawing new: The embedded parts and special meshes are also copied when they are selected from another project.
- Staircase - Change type parameters in the dialog: In the "Positioning of the stair" function, the "Visibility" option in the "View > Visibility" ribbon has been added.
Rebar
- The last quantity entered in the laying is now remembered.
- Modifies were made to reinforcements that were attached to split surfaces and deleted when reading into STRAKON 2026+.
- The message when the minimum distance is exceeded during laying is now also translated in the foreign language versions.
- Copy laying: The program crash when determine the reference point has been fixed.
Special meshes
Cube View (Project Model)
- The last entry for the mesh layer is now saved. After a new installation, the default for the mat layer is "0".The last input for the mat layer is now saved. After a new installation, the mesh layer defaults to "0".
Objects
- Dimensions on the stair and/or the podestal of a staircase are correctly updated in the case of a geometry change via the dialog of type parameters.
3D Views
Refresh- After refreshing, deleted rod clearances will now remain in the Cube reinforcement label (laying via quantity and distance).
- An existing section plane can be moved again.
Semi Precast Parts
General- When loading slabs and wall sets that were created in older versions of STRAKON and cannot be loaded, messages with error notes have now been added.
- For horizontally clamped slabs, shear force ranges are again displayed on the correct support.
- Profile embedded parts split at plate boundaries are now passed to the ULB file for the work preparation.
- Shortened lattice girders are also retained for oblique top or bottom edges of the wall.
Output / Import/Export / Interfaces
Publishes- Modifies were made when publish shop drawings.
- Save export on drawing incl. PTS log: The crash when clicking on a line of the log has been fixed.
- TLS 1.3 has been added to the PTS control protocol.