Requirement!
STRAKON 2022+ must be installed!
Download and Installation
- Click the STRAKON2022+Patch3_Revision3.exe file and the Save command.
- Select the directory in which you want to save the file.
- Click Close.
- Click on the saved file STRAKON2022+Patch3_Revision3.exe and follow the installation instructions.
- Start STRAKON (the user data is now automatically installed).
- After the installation the version STRAKON premium 2022+ .3.3 (64 Bit) is available in About STRAKON (menu ?)
STRAKON 2022+
Revised Themes for Patch 3
2D Design
Item drawing- Corrections in item selection
- The default hatching in the target view is output correctly when printing to PDF even if the main scale is different.
3D Modeling / Cube
General- Changes to Flex-Parts in the Cube can be undone again
- Corrections when opening the Cube model
- Improvements in the creation of the file for the recognition of the BCF version
- Corrections in the display of screenshots created in external programs
- Corrections in the determination of the item number in case of subsequent correction of the diameter
Cube Reinforcement
Rebar- Corrections in positioning
- Corrections in the creation of round bending shapes with later correction of bar and overlap lengths
- Corrections in the recognition of recesses during laying
- Corrections in laying in slightly inclined surfaces
Reinforcement
Meshes- Corrections in reading of non-existent mesh data
- Corrections in bar representation symbol of circular cube reinforcement
- Corrections in the display of bar representation of cube reinforcement from semicircular walls
Output / Import/Export / Interfaces / Data Exports
Print- Corrections in printing if incorrect layers are present
- Corrections during takeover of drawing data when printing several shop drawings at the same time
- Texts in the PDF file are printed in the correct width again
- Bent rebars are exported in the PXML file with specification of the bending device.
- Corrections in assembly 3D embedded part recognition
- Corrections in PDF import
STRAKON 2022+
Revised Themes for Patch 2
2D Design
Dimensions- Modify in the representation of the unit of measure "Foot" and "Inch"
3D Modeling / Cube
Edits- Modifies for assigning surfaces to devided areas
- Copy modifies including rotating objects in local coordinate system
- The ceiling thickness of the second floor is no longer taken from the floor of the first floor
- Set quantity of the risers from "Apply rise data to a story" is now retained
Project model
Cube Views- Modifies in the datum levels
Cube Reinforcement
Rebar- Modifies for a specific laying field of recesses and joggles
- Modifies when entering a laying in the section
- Modifies in calculating and representing layovers if the value for the overlap is too large for the selected laying area
Reinforcement
Meshes- Modifies when taking over design meshes in the mesh administration at the open drawing
- Modifies in the display query for standard and individual bending shapes with max. delivery length
- Modifies in the display labeling of only one bar of a laying
- Reinforcement is now also displayed when the 3D view is rotated.
- Modifies in the display of meshes
- Function 3D reinforcement check no longer crashes
- PXML reinforcement check optionally shows the comparison of counted reinforcement in drawing with the export PXML
3D Embedded Parts
Item- Modifies in checking the part data for positioning
- Correct implementation of the default item for embedded parts with a minus sign in the description text
- The quantity is correctly calculated again when the option "only general arrangements" is active.
Output / Import/Export / Interfaces / Data Exports
Print- Modifies when print PDF file if the Windows User Name contains spaces and fonts are installed locally
- Modifies when print PDF file of Cube Views regarding dimension, datum levels texts and shading of floor plan marker
- Modify in calculating the weight of a Flex-Part
- 3D embedded parts are now exported when they are visible in the export preview.
- Modifies when importing PDF files
- PXML export modifies for Cube reinforcement
- PXML export modifies if 2D/3D reinforcement counting factors > 1 have been used
Miscellaneous
Open drawing- If no 3D embedded part group were found, a message will appear.
- Modifies reading the Cube reinforcement and materials. In the tooltip the material is shown again.
STRAKON 2022+
Revised Themes for Patch 1
2D Design
Dimensions- Modifies performed at dimension text position
3D Modeling / Cube
Stairs- Embedded parts can be installed again without a message via the dialog.
- Calculation of the running line for winder stairs has been adjusted to current DIN.
- Input possibility of an inclined starting step and landing is supplemented
- Double winder stair can be used again without error message.
3D Views
Miscellaneous- The point labeling checkmark line is displayed correctly.
Cube Reinforcement
Rebar- Free laying field: A negative start/end distance is again possible during processing.
- Free laying field: The window can now be drawn in all directions of the coordinate system.
- Deleted bars from a laying field can be retrieved via the modify.
- In the laying field you can delete individual areas.
- The entry of 25% and 33% jolts at maximum delivery length is no longer possible. The input will be possible again for STRAKON 2023.
- Modifies for changes in the object data dialog
- Bent meshes: The concrete cover for changes "longitudinal bars" is implemented correctly.
Reinforcement
Meshes- Modify SmartClick on a (cube) main view for the mesh representation
- When you update the 3D views, additional text is retained and item numbers no longer move.
3D Embedded Parts
Administration- The view settings can be reopened for profile embedded parts.
Output / Interfaces / Data Export
Print PDF- Flex-Part IDs are put back on the correct level in the pdf file
- Modifies in the display of fonts
- Modifies in the display of background color of texts
- Missing variables were added to Office templates of the reinforcement schedules
- Modifies when queries are aborted with Esc
- Modifies when exporting a DWG file
- Modifies during export if counting factors >1 have been used.
- Missing GlobalIDs for elements are now added.
- If the "Open PXML file" option is enabled and the PXML data export is enabled, the query is now made when the drawing is save whether the PXML data should be output.
Miscellaneous
Project model- Modifies reading the paths for the local state
- Modifies accessing work directory on substituted drives
- Modifies when using umlauts in Windows profile names
- Modifies when calculating the number of Flex-Parts and passing them on correctly to the office schedule.
- When "save as" to a new work directory, the case upper/lower of the containing Flex-Part name is retained.