Requirement!
STRAKON 2026 (64 Bit) must be installed!
Download and Installation
- Click the STRAKON2026Patch1_Revision2.exe (22.01.2026) file and the Save command.
- Select the directory in which you want to save the file.
- Click Close.
- Click on the saved file STRAKON2026Patch1_Revision2.exe and follow the installation instructions.
- Start STRAKON (the user data is now automatically installed).
- After the installation the version STRAKON premium 2026 .1.2 (64 Bit) is available in About STRAKON (menu ?)
If your reported hotline request is one of the items listed in the patch edit, please check that it is being processed after the patch has been installed.
STRAKON 2026
Revised Themes for Patch 1
General
Open Drawing- Modifies in the display of messages for defective profile embedded parts
- Modify opening project model drawings with different pen mapping
- Modify opening a determines project model shop drawing
- Modify opening a FT drawing copied project
- Modifies in creating a drawing model shop drawing in a new project
- Schedule headers and drawing data texts: The selected language is now also used for the supporters area.
3D Modelling / Cube
General- Modifies in calculating and displaying axes
- Command selection: The debug commands are now listed again in the installed language of the STRAKON version.
- Auxiliary object fragment enhancements
- Modifies in the production and transfer of bent form boards
- Modifies for better differentiation from the form board numbers 6, 8 and 9
General
Cube Reinforcement
- Modifies when placing Cube views in the drawing
- The function "Marking representation as bar representation" in the additional toolbar is now memorized in the modify.
- Rebar label modifies created with the "Automatically start" function.
- Even with rotated text of the reinforcement label, the text position right/left can now be used.
- Embedded parts are now also dimensioned from the beginning and end of the object using the Automatic.
- The values of the dimension chain distances are now to be entered in true size in the Automatic settings.
General
Insert
- Modifies in copy of Cube reinforcement
- Modifies in taking into account the real length of round stirrups
- Modify entering overlap length over leg modification for round stirrups
- Modifies for bent meshes when a 180° hook is added
- IFC: Optimizations in the insert of IFC files
3D Views
General- Modifies for displaying edge types
- Axes perpendicular to the viewing direction are redisplayed.
Reinforcement
Displays of 3D/Cube Reinforcement- Placed Cube view: meshes built into Flex-Parts are now also positioned.
- Modifies in create and refreshing 3D views
- Laying: modifies for adding recesses
Semi Precast Parts
Wall- Bonus lattice girders is now installed in parallel with the standard lattice girders if the wall is not orthogonal.
- Iron supernatant now arrives in the single sheet when there is a recess in the edge.
- The tolerance for removing narrow webs at angles that are not exactly 90° has been increased.
Output / Import/Export / Interfaces
CPIXML- You can export from a project model of general arrangement again.
- The switch position in the "output/viewer formats" section is again noted.